Telescopic Conveyor
The use of telescopic belt conveyor, shorten the distance of manual back and forth handling of materials, can shorten the time of loading and unloading of goods, reduce labor intensity, reduce the damage of goods, reduce the cost of loading and unloading, improve efficiency, telescopic belt conveyor is first used in the logistics courier, tobacco industry.
Telescopic conveyor (also known as telescopic loading machine), it can be freely retracted in the length direction, control the length of the conveyor at any time. It can run in both directions to convey materials, and can be used in conjunction with other conveying equipment and material sorting system to realize the automated production of materials in and out of storage or vehicle loading and unloading, which is widely used in various industries.
Application:
The positioning conveyor of the telescopic belt conveyor is mainly applicable to the loading and unloading operation of the bagged goods of about 10-60 kilograms. Functional characteristics of the telescopic belt conveyor 1, the conveyor can be moved to different operating locations at will by only two people. 2, directly pushed to the interior of the carriage, and can be about 10 meters deep into the carriage for the operation. 3, the conveyor operation, only manual close to drag the goods can complete the operation, positive turn on the goods, reverse turn down the goods, the loading and unloading efficiency of up to 30 pieces of goods per minute. 4, according to the needs of the operation of the conveyor operating position of multi-directional adjustment, the use of mechanical Adjust the position of the conveyor according to the operation demand, using the hydraulic device of the mechanical arm, the higher can be raised to 4 meters, the lower can be lowered to 2 meters, solving the problem of difficult to palletize heavy goods.
Instructions for use:
Firstly: move the conveyor to the loading place; secondly: move the conveyor to the inside of the car; thirdly: turn on the power, turn on the switch to work, the side switch is the inverted switch, the front button is the start switch, the red light is the power indicator, the monitor is the counting display device (there is a small button on the top, which can return the counting to zero.); fourthly: according to the operation requirement, the conveyor can be adjusted according to the operation requirement. Step 4: According to the operation requirements, the head height can be adjusted by the hydraulic device, the hydraulic controller is triggered outward, the head rises, and triggered inward, the head falls. Note: Trigger the controller slowly when descending; Step 5: When the operation is completed, unplug the power, turn off the switch, and then move it to the designated place for placement.
