Sealed Bucket Elevator Price Specialized Elevator
TD bucket elevator consists of operating parts (hopper and traction tape), upper part of TD bucket elevator with drive drum, lower part of TD bucket elevator with tension drum, middle shell of TD bucket elevator, driving device, counter braking device, etc. TD bucket elevator is suitable for loose density p<powder, granules and small non-polished semi-polished loose materials, such as coal, sand, coke, cement, Crushed ore and so on are conveyed upward.
Turntable type elevator
1. Low driving power, large-capacity hopper is densely arranged. When the material is lifted, there is almost no back mining and excavation, so the ineffective power is small.
2. Wide lifting range of the elevator, low requirements on the type and characteristics of the material, not only to promote the use of general powder and small particles of material, but also to improve the grinding performance of the material, good sealing, and low environmental pollution.
3. Good operational reliability, good design principles and processing methods to ensure the reliability of the whole machine, trouble-free time of more than 20,000 hours, high height, the elevator runs smoothly, can reach a high lifting height.
4. Long service life of the belt bucket elevator, the feeding material is flow type, no need to use bucket excavator, less extrusion and collision between materials, the design of the TD bucket elevator is designed to ensure that the material in the uploading and unloading process disperses less and reduce mechanical wear and tear.
Series Bucket Elevator Overview
Reciprocating Vertical Elevator
Th type vertical bucket elevator is used for vertical conveying of powder, granule, small block and small block loose materials such as granule, coal, crushed ore, etc. The lifting height is 40m, which is characterized by simple structure, stable operation, excavation loading, centrifugal discharging, and the temperature of materials does not exceed 60℃. Vertical bucket elevator is used for vertical conveying of granules, coal sludge, crushed ore and other small lumps, characterized by simple structure, stable operation, excavation loading, centrifugal discharge, and material temperature not exceeding 60℃."” -.
The main performance and application of TH series bucket elevator
Th vertical bucket elevator consists of operation part (hopper and traction chain), upper part with driving drum, lower part with tension drum, intermediate shell, driving device, reverse braking device and so on. It is suitable for upward conveying of loose density P< powder, granules and small pieces of non-elusive semi-polished loose materials such as coal, sand, coke, cement, crushed ore and so on. The machine is characterized by fast centrifugal unloading and adopts a ring chain as the traction element, which is not suitable for transporting large-sized high-resistance grinding and cutting materials. The temperature of the transported material must not exceed 60°C, or 200°C if heat-resistant tape is used.
The machine has seven specifications such as TH 100, TH160, TH250, TH 315, TH400, TH00, TH630, etc., and its conveying capacity is 4≤238m3/h, and the height is about 4≤40m. In order to meet various different requirements, the machine adopts four kinds of manufacturing methods such as Q-type (shallow hopper), H-type (curved-bottomed hopper), ZD-type (medium-deep hopper) SD-type (deep hopper), and the method of transmission device, etc. method.
Application scope of TH series bucket elevator
Th Vertical Bucket Elevator is a kind of vertical transportation equipment with fixed installation, which is mainly suitable for vertical transportation of grain, oil, feed (except viscous and corrosive materials) and so on.
TH series bucket elevator main structure
1. Head parts: it consists of upper shell, movable shaft parts, reducer, coupling, motor and so on.
2. Central housing: According to the height to be raised, different numbers of central housing can be combined to meet the needs.
3. Lower part: It consists of bottom shell, driven shaft component and tensioning device. A door is provided on the side of the housing which can be opened for internal inspection, e.g. cleaning.
4. Chain and Hopper: The chain is a round steel welded ring chain. The hopper nut is fixed at the connection of the chain. At different heights, the bucket elevator has a corresponding number of chains, joints and hoppers.
3NE series plate chain bucket elevator is suitable for conveying raw materials, cement, coal, limestone, dry clay, clinker and other powders, particles, small pieces or non-polished materials, and the temperature of materials is controlled below 250℃. This series of elevator adopts flow feeding and induction discharging, the material flows into the hopper, lifts up to the top of the plate chain, and discharges itself under the action of material gravity. The main technical parameters are in accordance with the standard of the Ministry of Machinery (JB3926-85). Nickel plate chain bucket elevator is a new type of lifting product developed by introducing foreign advanced technology. Due to energy saving and high efficiency, NE plate chain bucket elevator is gradually replacing HL type bucket elevator. The chain is a high-quality alloy steel high-strength steel plate chain, wear-resistant and reliable.
1. Sealing is good and bad, less environmental pollution;
2. Easy to operate and repair, less non-wearable parts;
3. High cost of use, because of energy and repair is difficult, the cost of adoption is high;
4. Running credible, Citroen's design principle, to ensure the reliability of the whole machine traveling;
5. terrible structural rigidity and low precision. The chassis is folded and below the pressure rib, and again after welding, the rigidity is terrible, the appearance is beautiful;
6. Large mechanical size, and the same lifting capacity of various other hoist relative to the mechanical size of this hoist is relatively large;
7. Small conveying capacity, this series of elevator with NE15 ~ NE800 specifications. Lifting capacity range of 15-800m3/h;
8. Easy to operate, difficult to repair, not wearing parts difficult. Conveyor chain as a sleeve roller chain, induced gravity discharge, used as a variety of powdery, lumpy particles of vertical lifting.
NE plate chain bucket elevator main structure.
NE Plate Chain Bucket Elevator is composed of running parts, driving device, upper device, northern casing and upper device.
Running parts----consist of hopper and special plate chain, NE30 and below use single-row chain, NE50-NE800 use double-row chain.
Driving device---Use a variety of hydraulic hybrid hydraulics, ( according to the specific needs of users and thus customized ). The drive platform is installed above the maintenance frame and railing. Divided into two kinds of left and right mounted.
The lower part of the device ----- installed with rail & # 40; double-row chain & # 41;, backstop, discharge port is equipped with anti-return rubber plate.
Lower section---Part of the lower section is equipped with rail(double chain)to avoid the chain rotating in the work.
The upper part of the device---is equipped with automatic tensioning device.
NE bucket elevator main working parts features.
1, the upper device: installed with a track (double-row road), to avoid chain rotation, backstop, to avoid rotation of the hopper, the material blocked full of the upper casing, the discharge port is equipped with a rubber plate to avoid the return of materials.
2、Below section: part of the below section is equipped with rails (double rows of sections) to avoid the chain rotation in the middle of the work, and part of the below section is equipped with an access door in order to repair.
3、Upper device: Tensioning device is installed, NE15~NE50 use spring tensioning device, NE100~NE800 use weight box tensioning device.
Upper and lower sprockets use ZG310-570, overall tempering, HB229-269 tooth surface quenching HRC40-48.
5、Plate Chain: The chain plate uses 45 # HRC36~42.
a, the use of plate chain has a relatively low shear strength, fatigue strength and wear resistance, high failure rate, long service life; b, the use of relatively high chain speed & # 40;o.5 m / s & # 41;; c, the use of small-capacity hopper with a relatively large bucket spacing, drive power is low and conveying capacity. To cope with limestone and cement clinker after raising the debris.
